Sidetone in headphones feeds some of your microphone's sound back into your headset speakers so you can hear yourself while speaking. If you hear your own voice, distinguish this near-instant feature from Windows “Listen to this device” monitoring and delayed echo from a call or an audio-routing loop before changing settings.
Instant, natural self-voice is often sidetone. A delayed repeat is more likely echo. A full copy of the microphone in the headset can come from an operating-system monitoring setting.

What Is Sidetone in Headphones?
Sidetone returns a controlled amount of your headset microphone's signal to your ears while you talk. Headset makers may also call it mic monitoring. It is useful when closed-back earcups reduce how clearly you hear your own voice, helping you avoid speaking louder than necessary. SteelSeries' sidetone explanation describes this microphone-to-speaker path.
The sidetone level controls how much of your own microphone you hear. It does not by itself improve the microphone signal sent to other people. It also differs from an ambient or transparency mode, which is mainly intended to let you hear sounds around you. A headset may offer sidetone, ambient mode, both, or neither; check the exact model and connection mode. Sidetone can also return room noise picked up by the microphone. Sony's INZONE sidetone guidance describes this behavior for supported models.
| Symptom | Likely cause | First check |
|---|---|---|
| Your voice is immediate and low-level | Sidetone / mic monitoring | Headset app, hardware control or call app |
| Your voice repeats after a delay | Echo from another device/participant or routing loop | Mute other speakers and isolate the call path |
| You hear all mic input continuously | OS monitoring or sidetone picking up room sound | Windows “Listen” setting, then headset sidetone |
These symptoms are clues, not a diagnosis. Turn off one monitoring path at a time and test again; sidetone and software monitoring can both play microphone input, including background sound.
Turn Off Windows Microphone Monitoring
On Windows, open the classic Sound control panel, select the Recording tab, choose your microphone, and open Properties → Listen. If “Listen to this device” is selected and you do not want to hear the microphone through your headphones, clear the checkbox and apply the change. On Windows 11, you can reach the classic panel through Settings → System → Sound → More sound settings. This Windows playback setting is not necessarily the same as a headset's built-in sidetone control.
Check the Headset App or Hardware
Gaming and work headsets may intentionally provide sidetone so users do not shout while wearing isolating earcups. Look for a Sidetone or Microphone Monitoring control in the manufacturer's app, a hardware dial, or the calling app. If it is adjustable, start at a low level and raise it only until your voice sounds natural. Use sidetone if it helps you judge your speaking volume; lower it or turn it off if it distracts you. If you hear excessive room noise, reduce the level. Not every headset supports this feature or allows it to be changed. Some models activate it only during calls or while the microphone is active, so test it in the mode you actually use.
When comparing headsets for frequent calls, consider sidetone alongside microphone placement, mute controls, and compatibility. Wantek's guide to choosing a headset for work calls covers connection, microphone placement, wearing style, and mobility.
Fix Delayed Echo
- Mute nearby speakers and test again.
- Ask the other participant to use headphones if their speakers feed your voice back into their mic.
- Close duplicate conferencing apps that may open the microphone twice.
- Select one intended input and output device in the call app.
- Disconnect adapters or virtual audio devices temporarily to isolate the route.
Do Not Disable Sidetone If You Actually Prefer It
Sidetone is a feature, not a defect. Some people prefer a small amount of immediate self-voice during calls, while others prefer to hear less of it. If the voice is delayed, check the monitoring path or call setup instead of assuming the sidetone feature is responsible.
Frequently Asked Questions
Why can I hear my voice instantly in my headset?
That is often sidetone or mic monitoring. Check the headset software, hardware controls and operating-system monitoring settings.
Why do I hear my voice a second later?
A delayed repeat is more likely echo from another device, speaker-to-mic leakage or a routing loop.
What is Windows 'Listen to this device'?
It routes microphone input to an output device for monitoring. Disable it if you do not want to hear the microphone continuously.
Is sidetone the same as echo?
No. Sidetone is intentional and near-instant; echo is an unwanted delayed copy of your voice.
Can you adjust or turn off sidetone?
On some headsets, yes. Look for Sidetone or Mic Monitoring in the companion app or physical controls. Availability and adjustment range depend on the specific model and connection mode.
Is sidetone the same as transparency mode?
No. Sidetone feeds your speaking microphone back to your ears. Transparency mode primarily lets outside sounds through using microphones. Some headsets offer both, but their controls and behavior vary.
Choosing a headset for calls? Narrow your options by device, connection, and wearing preference, then check the specific model's sidetone controls before buying.
