If you are searching for a Vocollect headset for warehouse voice work, start by separating the headset from the voice device it connects to. Honeywell’s current Voice lineup identifies the SRX3 as a wireless headset, while A700x products are mobile voice devices that can pair with it.
For a new deployment, the SRX3 is the current starting point in Honeywell’s published lineup. Several older Vocollect/SR headset families are discontinued, so an existing site should check model status, software requirements, accessories, and migration needs before buying replacements.

Current and Legacy Vocollect Headset Status
Honeywell’s current SRX3 Wireless Headset page positions the SRX3 for warehouse, distribution, and fulfillment voice workflows. Honeywell’s discontinued-product list shows which older headset and voice-device families have reached end of sale or support.
| Model or family | Published status | What it means for a warehouse |
|---|---|---|
| SRX3 Wireless Headset | Current Honeywell Voice wireless headset page | Use as the current headset starting point, then verify the required voice software, device pairing, and workplace configuration. |
| SRX2 | End of sale June 1, 2020; end of support December 1, 2025; replacement listed as SRX3 | Treat it as a legacy fleet. Check migration and replacement requirements instead of buying it as a current platform. |
| SR-15, SR-21, SR-30, SR-35, SR-40 | End of sale November 30, 2025; end of support December 31, 2026; replacement listed as SRX3 | Existing installations may still need support or spares, but new planning should account for the published replacement path. |
| A500, A700, T5/T2x/T1 | Legacy voice-device families with A700X listed as replacement | Do not confuse these device names with headset models when documenting or purchasing a Vocollect/Honeywell Voice system. |
What the Honeywell Voice SRX3 Actually Adds
The SRX3 is built as part of a voice-directed workflow rather than as a generic Bluetooth calling headset. Honeywell lists speech-recognition features, flip-to-mute when used with supported headbands, remote update capability, and backward compatibility with prior-generation SRX2 equipment.
Its modular design also matters in multi-shift operations. Honeywell says the electronics module can detach from the headband, and the headset can be configured with a regular headband, a cupped headband, or a hard-hat setup. Those options are more useful procurement criteria than generic claims such as “best sound” or “military-grade” without a model-specific specification.
Do Not Confuse the Headset With the Voice Device
A warehouse voice solution is more than a headset. Honeywell’s current A710x page describes the A700x family as mobile voice devices and states that the A710x can be paired with the SRX3 headset.
That distinction matters when replacing legacy hardware. A headset compatibility question can involve the voice device, software version, firmware, pairing method, and accessories. A model name alone does not prove that a replacement will work in the existing deployment.
Compatibility Checks Before You Buy
- Voice platform and software: confirm the exact Honeywell Voice/Guided Work environment and the minimum software requirements listed for the headset.
- Voice device: document whether the site uses A700x hardware or a legacy A500/A700/T-series device.
- Wireless or wired path: verify whether the current workflow is designed around SRX wireless headsets or an older wired SR-series configuration.
- Firmware and pairing: check the supported firmware, update utility, and pairing procedure for the deployed devices.
- Physical configuration: decide whether workers need a standard headband, cupped headband, or hard-hat-compatible setup.
Do not assume that “works with a warehouse management system” is a headset-only feature. The headset is one part of the wider voice workflow, so validate the complete hardware and software path.
Accessories, Hygiene, and Multi-Shift Use
Accessories should be planned around the exact headset family instead of purchased from a generic checklist. Honeywell’s wireless headset accessory page lists replacement pads and headbands for SRX headsets and specifically connects those options with comfort, hygiene, and multi-shift operation.
For a shared fleet, document which parts stay with the worker, which electronics are shared, how worn pads or headbands are replaced, and how replacement stock is managed. That produces a more useful accessory plan than assuming every site needs the same batteries, cases, or microphone covers.
How to Pilot a Warehouse Voice Headset
- Confirm the voice device and software version before pairing the headset.
- Test the exact headband or hard-hat configuration used on the floor.
- Run normal picking or fulfillment tasks in the real acoustic environment.
- Check speech recognition, microphone position, mute behavior, fit, and worker movement.
- Repeat the test across representative shifts and user groups before standardizing.
A pilot should reproduce the actual workflow. Playing warehouse noise from a video is not a substitute for testing the headset with the deployed voice system, workers, protective equipment, and operating environment.
What to Do With a Legacy Vocollect Fleet
Start with the exact model inventory. If the site still uses SRX2 or SR-series headsets, compare the published end-of-support dates with your service contracts and replacement schedule. If the site uses A500, A700, or T-series voice devices, treat that as a separate device migration question rather than calling those units “headsets.”
For any purchase made after a published end-of-sale date, verify current availability, support, warranty, and replacement status directly with the manufacturer or an authorized channel. Legacy stock can exist after end of sale, but that does not make it the best baseline for a new deployment.
Frequently Asked Questions
What is the current Honeywell Vocollect wireless headset?
Honeywell’s current Voice product page lists the SRX3 Wireless Headset. Its published features include speech-recognition support, configurable wearing options, flip-to-mute with supported headbands, and backward compatibility with SRX2 equipment.
Is the Vocollect SRX2 still a current headset?
No. Honeywell lists SRX2 end of sale as June 1, 2020 and end of support as December 1, 2025, with SRX3 as the replacement.
Is the Vocollect A500 a headset?
No. Honeywell lists A500 in its legacy voice-device path with A700X as the replacement. Current A700x documentation describes the family as mobile voice devices that can pair with the SRX3 headset.
Can I replace a legacy Vocollect headset without checking the rest of the system?
No. Verify the voice device, software and firmware requirements, pairing method, physical configuration, and any required accessories before standardizing a replacement.
