The best open-back headphones for an audiophile setup depend on where you listen, what drives the headphones, how much weight you are comfortable wearing, and whether you want a music-first or studio-oriented design. There is no universal winner.
Quick answer: start with the listening environment. Open-back headphones are built for quiet spaces where sound leakage is acceptable. Then compare source requirements, fit, serviceability, and the exact job you want the headphones to do.
This guide compares five current wired open-back models using manufacturer specifications. It does not present hands-on sound rankings or claim that specifications alone predict which headphone you will prefer.
What open-back design changes
Open-back earcups leave the rear of the driver acoustically open instead of sealing it inside a closed cup. That construction is common in home-listening and studio headphones, but it also means outside sound can remain audible and your music can leak into the room.
That trade-off matters more than a marketing label. If you listen on flights, public transit, or in a shared office, a closed-back or noise-cancelling model is usually the more practical category. If you are still deciding by connection and listening environment, see Wantek’s wired vs. wireless headphones for music guide.

Five current open-back headphones to compare
| Model | Documented setup facts | Why it belongs on the shortlist |
|---|---|---|
| Sennheiser HD 800 S | Dynamic open-back; 300 Ω; 330 g; 6.35 mm and 4.4 mm cables | A flagship-style home-listening option for buyers prepared to check source output and fit. |
| Sennheiser HD 660S2 | Dynamic open-back; 300 Ω; 260 g; 6.35 mm and 4.4 mm cables plus 3.5 mm adapter | A lighter 300-ohm Sennheiser option with replaceable pads and cables available from the manufacturer. |
| Beyerdynamic DT 1990 PRO MKII | Dynamic open-back; 30 Ω; 376 g; detachable mini-XLR cable | Designed for mixing, mastering, and editing, with replaceable wear parts listed by Beyerdynamic. |
| Meze 109 PRO | Dynamic open-back; 40 Ω; 375 g; dual 3.5 mm inputs; 112 dB SPL/mW | A lower-impedance home-listening design whose parts are intended to be serviceable. |
| Audeze LCD-X | Planar magnetic open-back; 20 Ω; 612 g; manufacturer recommends more than 100 mW | A planar option used for critical listening and production; weight and source power deserve extra attention. |
Sennheiser HD 800 S: check the source and fit before buying
The Sennheiser HD 800 S is a 300-ohm, circumaural dynamic open-back headphone weighing 330 g. Sennheiser supplies 6.35 mm unbalanced and 4.4 mm balanced cables and lists a detachable-cable design.
The important buying question is not whether a high price or wide published frequency range makes it “best.” It is whether your source can drive it to the level you need, whether the large fit works for you, and whether a fully open home-listening design suits the room.
Sennheiser HD 660S2: a lighter 300-ohm alternative
The Sennheiser HD 660S2 is also a dynamic open-back 300-ohm design, but Sennheiser lists it at 260 g. It includes 6.35 mm and 4.4 mm cables plus a 6.35-to-3.5 mm adapter.
Its lower weight makes it physically different from the HD 800 S and LCD-X before sound preference enters the decision. The 300-ohm rating is also a reason to check the output capability of your interface, DAC/amp, or headphone amplifier rather than assuming any 3.5 mm jack will provide the same headroom.
Beyerdynamic DT 1990 PRO MKII: studio use with a 30-ohm driver
The Beyerdynamic DT 1990 PRO MKII is an open, circumaural studio headphone rated at 30 ohms and 376 g. Beyerdynamic positions it for mixing, mastering, and editing and uses a detachable mini-XLR cable.
The manufacturer also lists replacement ear pads, headbands, cables, and driver systems. That makes serviceability a concrete reason to compare it when the headphone is expected to stay in a studio setup for years.
Meze 109 PRO: lower impedance and serviceable construction
The Meze 109 PRO uses a 50 mm dynamic driver in an open-back design. Meze lists 40-ohm impedance, 112 dB SPL/mW sensitivity, 375 g weight, and dual 3.5 mm inputs.
Meze also describes the 109 PRO as designed to be disassembled and serviced. The 40-ohm rating can make source matching simpler than with some 300-ohm models, but impedance by itself still does not predict volume, headroom, or sound quality.
Audeze LCD-X: planar magnetic with a much heavier chassis
The Audeze LCD-X is an open-back planar magnetic headphone with 20-ohm impedance and a listed weight of 612 g. Audeze specifies a minimum recommended power above 100 mW and a recommended level above 250 mW.
That combination is a useful reminder that low impedance does not automatically mean “easy to drive.” The LCD-X also weighs substantially more than the other models in this comparison, so fit and long-session comfort should be evaluated separately from its electrical requirements.
How to choose the right open-back headphone
1. Start with the room
Choose open-back only if leakage and outside noise are acceptable. A strong open-back headphone can still be the wrong tool in a noisy room because the design does not give you the isolation of a closed cup or active noise cancellation.
2. Check impedance, sensitivity, and source output together
Do not use impedance as a one-number difficulty score. The HD 800 S and HD 660S2 are both rated at 300 ohms, while the LCD-X is 20 ohms yet carries an explicit power recommendation from Audeze. Source voltage, available power, headphone sensitivity, and your required listening level all matter.
3. Treat weight and fit as independent specifications
These five models range from 260 g to 612 g. That difference is large enough to matter during long listening sessions, but weight alone does not determine comfort. Clamp, pad shape, headband pressure, glasses, and head size can change the result.
4. Match the headphone to the job
A home-listening headphone and a studio tool can overlap, but the priorities are not identical. The DT 1990 PRO MKII is explicitly positioned for mixing, mastering, and editing. The HD 800 S and Meze 109 PRO are presented primarily as high-fidelity listening products. Decide whether you are choosing for enjoyment, production decisions, or both.
5. Value serviceable parts if you plan to keep it
Detachable cables and replaceable pads can matter more over several years than a specification that never changes how you use the headphone. Sennheiser, Beyerdynamic, and Meze all document replaceable or serviceable components for the models above.
Open-back vs. closed-back: the practical decision
- Choose open-back for quiet, private listening when leakage is acceptable and you specifically want an open acoustic design.
- Choose closed-back when isolation, privacy, commuting, tracking near microphones, or active noise cancellation matters more.
- Do not assume either enclosure guarantees better sound. Driver design, tuning, fit, distortion, source matching, and personal preference still matter.
Frequently asked questions
Are open-back headphones better for audiophiles?
Not automatically. They are common in quiet-room listening, but they leak sound and provide limited isolation. The better choice depends on your room, source, fit, and tonal preference.
Do 300-ohm headphones always need a separate amplifier?
No. Impedance is only one input. Sensitivity, source output, desired level, and headroom also matter, so check the complete headphone-and-source pairing.
Can open-back headphones work in an office or on a plane?
They can produce audio there, but leakage and weak isolation usually make them a poor practical fit for shared or noisy environments.
Does a wider frequency-response specification mean better sound?
No. A published range does not tell you tonal balance, distortion across level, channel matching, imaging, fit, or whether you will prefer the tuning.
